The e-mark is an electronic and mobile (battery-powered) marking device to create and change own imprints and print them by an easy sideways movement
Operated through an App on a mobile device or stationary computer, almost unlimited designs, ready-to-use templates and special features are available
The e-mark connects with your mobile device (such as a smartphone or tablet) through an own generated WIFI-network
Imprints are transferred fast and it can be marked immediately
Markings on the side of the e-mark ensure a reliable positioning on your documents by the help of advanced sensor technology
A notch in the middle of the marking shows the centre line of the imprint
It works perfectly with COLOP labels
A transparent window in the front provides a better view of the imprint during marking
Rotating LEDs around the e-mark indicate the current state and connectivity to your mobile device
Easily replaceable and long-lasting cartridge for high-quality full-colour imprints
The printhead is integrated in the cartridge and visible on the bottom side of the e-mark
The inbuilt fast-charging Li-Po battery (11.1 V) allows using the e-mark for several hours (4.5 hours continuous marking) without connection to the grid
It is charged within 2.75 hours (0 - 100 %)
Base station for quick charging and protection against drying out of the printhead
Is integrated in the docking station and protects the printhead optimally against drying-out
The e-mark should always be put in the docking station with its integrated protecting cap
Move gently from left to right or the other way round for making an imprint, supported by sliding wheels
An optical sensor provides speed control for best and reliable imprint results
Connect the e-mark with your computer via a Micro-USB cable
Note that charging is only done with the power plug
Switch on the e-mark through an opening on the docking station to avoid drying-out of the printhead
4 contact pins provide a connection between the e-mark and docking station for charging
Can be opened easily to change a cartridge via a small notch on the bottom of the cover
COLOP e-mark: -> Change Rolls
COLOP e-mark: -> Reset the e-mark
COLOP e-mark: -> e-mark wizard
COLOP e-mark: -> Unboxing
COLOP e-mark: -> Installing the ink cartridge
COLOP e-mark: -> Printhead cleaning
COLOP e-mark: -> Change Ink Cartridge
Multicolour imprints (add logos and images to imprints)
Battery-powered for highest mobility and flexibility
Storing up to 4 imprints permanently on the e-mark
Applicable on all absorbent surfaces
Sophisticated App for unlimited imprint designs
Automatic date, time and numbering function
QR-code and barcode generator
Extensive range of ready-to-use stamp-imprints
Create own and personalised imprints
Modern and ergonomic design
Plug and play
